JBA Offroad HD UCAs For 4-12" Lift Kits

TrailJustin · 2025-12-17T07:13:33+00:00

When I was shopping for my truck one of the things I didn't settle on was wanting the 14in screen. BUT, I was still looking at SR5 packages that only had the 8in screen because I found out you can swap out the screen. NOW! I am not talking about some after market android base screen that doesn't implement well with the truck. To my surprise a OEM Toyota 14in screen is plug and play into the truck. The screens are not VIN tied or need to be unlocked or reprogram. They just plug in. But there is a catch to that. If you truck did not come with the 14 in screen it does not have the volume knob on the dash. Now the steering wheel buttons DO work and you can modify the dash. Lets get into it. First this is the video I watched where the dude actually did it. Parts List: Screen - 86100-0C360 Volume Knob - 86128-AN020 Switch and Volume Assembly - 86170-0C010 Things you need to know: The screen is easiest found on Ebay for around $800. Make sure you pay attached to JBL vs no JBL depending on what you have inside of your truck. Also you want to make sure you get one with the vents on the side. If not you need to modify you existing vents which isn't fun this makes it even more plug an play. You can simply remove the dash assembly where the volume knob is supposed to be. You are able to use a step bit like in the video to add the volume knob and switch and the wiring is already there. People even say there is a marking were you need to drill. Also please if you do there add your photos below. Also check to make sure it all turns on before putting the dash back together.

JBAoffroad

New member

Yesterday at 7:14 PM

Hey everyone.

JBA Offroad here!

Sharing one of our UCA options for the 3rd Gen Tundra. This is our HD version. This one is designed for larger lift kits.

Pre-assembled upper control arms designed for Tundra 2022+ and Sequoia 2023+ with a cradle drop lift (4″–12″)
Built from heavy-wall DOM steel tubing with a red powder-coat finish
Includes JBA Max 90 ball joints and greaseable EZ Lube bushings for easier maintenance
Arms are ready to bolt in using factory mounting points, no fabrication required
Designed to fit lifts that maintain stock-style upper arm geometry (cross-member/cradle drop)
Comes with all hardware needed (arms, ball joints, bushings, sleeves, mounting bolts, instructions)
Designed so the ball joints line up properly with the steering knuckle at lifted heights
Recommended greasing every 3,000–5,000 miles for both ball joints and bushings

https://jbaoffroad.com/jba-hd-cradle-drop-a-arms-for-2022-plus-toyota-tundra-2wd-4wd

Any questions? Let us know!