Adam's Polishes UV Graphene Ceramic Coating - 1 Month Review

Swapping Out The 8in Screen for the OEM Toyota 14in Screen

TrailJustin · 2025-12-17T07:13:33+00:00

When I was shopping for my truck one of the things I didn't settle on was wanting the 14in screen. BUT, I was still looking at SR5 packages that only had the 8in screen because I found out you can swap out the screen. NOW! I am not talking about some after market android base screen that doesn't implement well with the truck. To my surprise a OEM Toyota 14in screen is plug and play into the truck. The screens are not VIN tied or need to be unlocked or reprogram. They just plug in. But there is a catch to that. If you truck did not come with the 14 in screen it does not have the volume knob on the dash. Now the steering wheel buttons DO work and you can modify the dash. Lets get into it. First this is the video I watched where the dude actually did it. Parts List: Screen - 86100-0C360 Volume Knob - 86128-AN020 Switch and Volume Assembly - 86170-0C010 Things you need to know: The screen is easiest found on Ebay for around $800. Make sure you pay attached to JBL vs no JBL depending on what you have inside of your truck. Also you want to make sure you get one with the vents on the side. If not you need to modify you existing vents which isn't fun this makes it even more plug an play. You can simply remove the dash assembly where the volume knob is supposed to be. You are able to use a step bit like in the video to add the volume knob and switch and the wiring is already there. People even say there is a marking were you need to drill. Also please if you do there add your photos below. Also check to make sure it all turns on before putting the dash back together.

TrailJustin

Member

Sunday at 6:02 AM

I wanted to torcher test this coating before putting it on my Tundra so I coated my wheels! Now there is no enviorment more harsh than wheels. They get the dirtiest, cleaned with rough brushes, and more.

I got a brand new set of Modco M72 wheels. From there I did and IPA wipe down and then coated them with 2 layers of this coating. Waited for it to flash and then knocked it down. From there I let them cure for 24 hours.

Now 1 month later I have been through mud duck hunting, water, washes, brake dust and more and so far the coating is holding up. It still beads water and sprays off rather easily. I am noticing that the brake does is embedding itself is some of the tight corners and that may be something to monitor but so far so good. I do think I will follow up and coat the whole truck in this same coating and see how it holds up.

Adam's Polishes UV Graphene Ceramic Coating - 1 Month Review

TrailJustin

Member

Recent

Swapping Out The 8in Screen for the OEM Toyota 14in Screen

Sac Motors Cars Cars and Coffee

Dealer Denied Warranty Claim because of "Modifications?

To Camper or not to camper?

Morrflate Four Tire Inflator Kit

Adam's Polishes UV Graphene Ceramic Coating - 1 Month Review

Why I carry a Zoleo Satellite Communicator

Should we switch to 5w-30 Oil?

Morrflate TenSix Pro Worth The Money!

Top 10 Reasons People Hate the New Tundra

How do I tell of my tundra has remote start or not?

Best Budget Lift Kits for the 3rd Gen Tundra

Similar threads